Polarity detection, visual addressing machine

The camera takes photos to find the position and positive and negative pole information, saves it locally, and uploads it to MES.

Product offline gantry crane arm

Component pre cleaning, wire box welding detection integrated machine

Intelligent typesetting and mixing conveyor in the photovoltaic industry

Automatic installation of junction box

Automatic cell feeding machine (mechanical arm feeding)

Manually unpack and place the battery cells onto the pallet; Use a pallet truck to place the pallet in the fixed position for loading onto the robotic arm.

Battery sorting machine

After feeding, perform cell scanning to achieve preliminary determination of cell scanning, and upload it to the MES system.

Module elevator

Used in front of the module line for lifting and lowering the module tooling board

EVA STRIP LAYING

By using the large scroll EVA feeding method, the cutting width can be switched with just one click.

1.5M double-layer conveyor workstation

Upper layer tooling is transported in place, blocking lifting and manual operation; After completing the assignment, press the release switch with both hands to release.

WELDING JUNCTION BOX

Used for component junction box wire connection welding.

NG discharge station

When there is NG at the current station, the upper tooling is transported in place to block the lifting position of the NG material being transported; After the manual repair operation is completed, press the release switch with both hands to release the repaired product. The repaired product is returned to the upper conveyor line, lifted and lowered, and the tooling is transported to the next workstation.

Pole cleaning machine

Mainly using lasers to remove foreign objects on the surface of the pole

Laser welding machine (welding aluminum bars)

Module transfer equipment

By using the servo module clamping mechanism, the module is lifted and transferred from the module line fixture board onto the PACK fixture board.

Folding arm lifting module into the box

By using a folding arm crane, lift the modules on the fixture board, then manually place the electrical box prepared on the pre installed workbench onto the PACK fixture board, and then place the modules into the electrical box.

PACK segment speed chain

Mainly used for the transportation of PACK and the return flow of empty tooling. This conveyor line is designed with two layers of transportation, with one elevator at the front and back of the line for lifting and rotating the tooling board.

AUTOMATIC GLASS LOADING MACHINE

Module extrusion bundling machine

After manually scanning the code to sort the battery cells, they are separated from the end plate by partitions and fixed as a whole through tying straps or riveting with extruded tooling steel strips.

EDGE BANDING MACHINE